Option 1. Set D/R for ALIE and ELEV to 70%Set Expo for ALIE and ELEV to + 30% Option 2. If the settings above are not tame enough try these settings. You will need to set up different throttle curves if you are not using a governor. ds415m cyclic servos. savox sh-1257mg tail servo. Slip on the thrust bearing and washer as shown.
Wing Wing Z-84 for Devo 7e (no switches) Elevons Wing Wing Z-84 for Devo 7e (no switches) Elevons Here is my base model for the full wing Z-84, 2 elevons aircraft, for a Devo 7e with range mod and no extra switches. Also give the Loctite time to cure before flight. I let mine cure for 24 hours. Soaring Circuits Recording Altimeter RAM 3 w/USB Comes complete with everything you need including PC interface cable, FlightView software on CD-ROM, breathable anti-static protective foam wrap, and instruction manual. Sorry if one ALREADY exists, in which case this should go there.
Small, light, and easy to use still installs in minutes. Lanyu ASW28 Lanyu ASW28 This may be useful to someone. Overall I’m glad that I went with the Align Trex 450L Dominator as my next step up because of it’s size. Also the heli won’t slam down to the ground hard if you move the throttle down too fast. This page will get your Align Trex 450L Dominator in the air if you look through all of the information. Mine is a Devo 10. There are no 3D settings here that will surprise you with a full throttle if you bump the FMOD switch by accident.